Pre- purchase surveys uk
pre purchase surveys uk When you buy a used boat, you want to get as much information as possible about its state before closing the deal.
The boat is structurally sound and safe? Is machinery and equipment on board in good working condition? The boat is good value for money?
My pre-purchase surveys give you confidence in what you buy.
They are complete inspections of the structural integrity, safety, condition of machinery and equipment, as well as general maintenance and aesthetics.
These controls include, but are not limited to: Marine surveying
- Hull machinery
- keel Fittings skin rudder
- hardware stern gear Mast,
- Boom and Rig topsides Gas installation Bridge,
- roof and cockpit water steering fuel
- inner shell electrical Installation bilge Anchoring and mooring
- Hatches and doors canopy
- Windows and portholes
As the title indicates, the survey complete pre-purchase state aims to identify all defects and deficiencies that could be perceived by a competent surveyor.
Moisture meter readings and surveys percussion hull and deck are also part of the investigation.
I use IIM and YDSA regulations and standards and use their guidelines for my investigations.
In addition, I verify that all the items mentioned in the announcement of a broker actually exist on board. Maritime expertise - Denta hauling of the boat is essential, so that I can check all the parts under water. A sea trial is highly recommended.
This allows me to check the engine and other systems under normal operating conditions. A survey of pre-purchase of a typical medium-sized boat can take a full day, depending on its complexity.
I will always encourage the prospective buyer to attend the inquiry, so that you get a better understanding of the investigative process and its investigation results.
My reports are detailed and include the fair market value of the boat as well as photos and recommendations.
Check out this link for information on the verification procedures
rigging investigation Overview marine surveys are specially trained in surveying Rigs.
The Rig Survey is recommended prior to any period of extended cruising or when the son of rigging your boat (standing rigging) are older than a few years.
Some insurance companies will require that you replace your son catching every ten years, some insurance companies will only continue to make sure if you have an inquiry Rig.
There are basically two methods of surveying the platform with the mast stepped (standing) or unenforced (reduced).
The most effective method of surveying the platform is not the mast and inspect the rails when supported horizontally on stands.
This should be done periodically during the life of a sailboat.
Interim inspections can be performed with the platform stairs (standing).
Insurance companies generally will not expect to be unenforced inspection platform, if the investigation Rig for insurance investigations overview marine surveyor usually involves climbing the mast (inspection from above).
Marine surveys overview Rig conduct investigations on all types of platforms across the UK.
We have experience in surveying rails constructed of various materials including; Aluminum, carbon, wood, and steel alloy.
We hold qualifications in the marine surveying and we are members of organizations, including the survey; International Institute of Marine Surveying (IIMS) or The designers and surveyors Yacht Association (YDSA).
Our rates are competitive, complete the application form online survey for a quote.
Rig surveys for yachts up to 12 meters or about 40 feet are normally completed within two or three hours. Rig investigations on large yachts with several rails are usually completed in one day.
Rig Survey includes an inspection of the following: Rig Survey EquipmentMast (s), including the mast base, cap and tabs Boom (S) and the fittings Son of rigging (rigging) rigging terminals Blocking tensioners (turnbuckles) wire and split pinning Beaching A report is provided to explain the results of the survey Rig.
In the report, the problems encountered during the survey are listed and information is on their importance and recommendations for repair.
Once the investigation was completed, we guarantee to provide the investigation report within 24 hours by email.
We will take the time to answer questions about the investigation and we are happy to give advice pleasure. Buy a gauge for non-destructive tester Yacht Rigging our online store Finding damage A survey of damage are usually controlled by a specific insurance company as part of a review of the application. Its function is to establish the extent of the damage and provide an estimate of repair costs.
In such circumstances, the land acts as the eyes and ears of the insurer.
Surveyor works in conjunction with the insured, the repair and all the participants involved. Insurance Investigations When you want to make a boat, or have to renew an existing policy, your insurance company will need an insurance investigation to determine insurability for the intended use.
This type of survey is often referred to as a state investigation and evaluation.
The scope of the investigation of insurance is similar to a pre-purchase survey, but its focus is on the integrity and safety of the structure and is less detailed.
An assessment of the fair market value of the boat is part of this type of survey. Insurance companies generally accept surveys in the water without a tow or sea trial.
Your insurance company may have its own requirements for what it considers an acceptable survey and boat owners are encouraged to consult their insurance broker before commissioning the survey.
A survey of insurance requires several hours, depending on the complexity and condition of the boat.
My investigation report is similar to a report of a study of pre-purchase, but a little less detail.
Evaluation reports These types of inspections are conducted to gather sufficient information to determine the fair market value of the boat.
My assessment of inspection reports evaluation includes a description of the boat and an assessment of its condition, including images. Inspection assessment evaluation usually takes a few hours, one hour to prepare the report.
Oil analysis tests If you ask surveys overview Marine Ltd. to perform an analysis of oil on the engine of the test vessel, it could highlight potential problems with engines and equipment before any serious damage to the unit and provide additional security for those who buy a boat.
Once I took the example of oil on the day of the survey, the rotation time of receipt of the sample for you getting your report should be 48 hours. This report can be emailed or posted. The analysis indicates: Engine The pattern of the actual wear of the equipment.
The state of the fuel injection equipment. How much maintenance has been performed. In a set-up twin that we can run a comparison between the two Facilities.
In addition to preventing damage and costly repairs take prompt action, a clean bill of health by the oil analysis would also add value to any customer wishing to buy or sell a boat.
A report can be used to demonstrate that the ship has no long-term problems or unpleasant surprises months after purchase.
The basic cost of a sample would be £ 90:00 it will be include VAT and all manipulations. ultrasound investigation Ultrasonic investigations are generally carried out to measure the coating thickness of the shell on yachts steel.
Hundreds of readings are taken around the hull to mark areas of the coating of the shell is thin. Survey ultrasound is not limited to the hull steel boats, walls, bridges and structures can also be measured as well as aluminum and GRP hulls and structures, contact us for your specific needs .
Conduct marine surveys overview ultrasound investigation of steel yachts under full state investigation.
We have the latest instruments for ultrasonic thickness gauge, they are non-destructive and accurate readings are made without removing paint or charging system.
Our main tool is the multiple thickness gauge ultrasonic echo Cygnus 4. Marine surveys overview performs ultrasound investigation of all types of ships across the UK and Europe.
We are experienced, hold qualifications in the marine surveying and are members of organizations, including the survey; International Institute of Marine Surveying (IIMS) or The designers and surveyors Yacht Association (YDSA).
Our rates are competitive, complete the application form online survey for a quote. Cygnus 2 - EquipmentA report is provided to explain the results of the ultrasound investigation.
In the report, the problems encountered during the survey are listed and information is on their importance and recommendations for repair.
All thickness measurements made during the investigation, including their position be recorded in the report. Once the investigation was completed, we guarantee to provide the report within 24 hours.
We will take the time to answer questions about the investigation and we are happy to give advice pleasure. To receive a quote for a study of ultrasound, complete the application form online inquiry or contact us directly with your requirements.
Inspections Delivery Inspection delivery of a new vessel takes place before accepting the boat yard or the dealer. The inspection is similar to a pre-purchase survey, but focuses on how the boat was completed and whether it was carried out in compliance with agreed upon at the time of the order specifications. I will also check to see if further changes agreed were taken care of properly.
My delivery inspection reports include a detailed punch list of items that must be addressed before officially take delivery. In addition, reports equipment list that I recommend that the boat is fully equipped for its intended use. consultations If you have little or no sailing experience before and that you are considering buying a boat, I can help you decide what type of boat will satisfy your needs.
